APC Back-UPS RS Replacement Batteries

APC Back-UPS RS Replacement Batteries

Replacement batteries for the APC Back-UPS RS / Pro RS family — BR800, BR900, BR1000, BR1500 and related models. The battery (a single 12 V or two 12 V wired to 24 V) depends on your exact model. Genuine APC and compatible aftermarket, shipped from our Canadian warehouse — match by your exact model.

  • Ships from Canada
  • Canadian shipping
  • 1-year warranty

APC Back-UPS RS Replacement Batteries catalogue

Showing 1-13 of 13

About APC Back-UPS RS Replacement Batteries

APC Back-UPS RS replacement batteries

The APC Back-UPS RS (and Back-UPS Pro RS) line — BR800, BR900, BR1000, BR1500 and related models — is a line-interactive UPS range for home offices and small setups. Its sealed lead-acid (VRLA) battery wears out after about 3–5 years; a fresh battery restores full runtime. Use this page to find the right battery for your exact Back-UPS RS model.

For the wider range see APC Back-UPS batteries and APC replacement batteries.

Battery type

Back-UPS RS models use 12 V VRLA batteries — smaller models use a single 12 V battery, while higher-capacity models (such as the BR1500) use two 12 V batteries wired to 24 V. Capacity and count depend on the exact model, so match by your model number rather than by VA alone.

How to identify the right battery

Find the model number on the rear or bottom label (e.g. BR1000, BR1500). Select the matching battery below, or send us your model number and we'll confirm the correct pack — usually within 1 business day.

Genuine APC vs compatible aftermarket

Both restore full runtime. Genuine APC: OEM cartridge with a 2-year APC battery warranty. Compatible aftermarket: the same 12 V form factor and tabs, built from quality VRLA cells, typically 30–50 % less, with a 1-year UPSPLUSBATTERY warranty.

How long does it last?

3–5 years at 20–25 °C. Heat shortens life — roughly halving it for every ~8 °C above 25 °C. See when to replace a UPS battery.

How to replace

Back-UPS RS batteries are user-replaceable:

  1. Confirm the correct battery for your model.
  2. Power down the UPS if your model's manual requires it.
  3. Open the battery cover on the base or rear.
  4. Disconnect the old battery's tabs and remove it.
  5. Fit the new battery (or pair), reconnect observing polarity, and close the cover.
  6. Recharge and run a self-test.

See how to install a UPS battery.

FAQ

What battery does my Back-UPS RS use?

A single 12 V battery on smaller models, or two 12 V batteries (24 V) on models like the BR1500. Match by exact model number.

Genuine or aftermarket?

For an in-warranty unit, use genuine APC. Out of warranty, a compatible 12 V battery performs identically for less, with a 1-year warranty.

How often should I replace it?

Every 3–5 years; sooner in warm spaces.

APC® and Back-UPS® are registered trademarks of Schneider Electric / APC. UPSPLUSBATTERY.ca is not affiliated with, endorsed by, or authorized by APC by Schneider Electric; aftermarket batteries are compatible replacements.

Why buy from UPSPLUSBATTERY.CA
Still narrowing down

Talk to a Canadian UPS specialist.

Our Canadian team has specified APC, Eaton, Tripp Lite, Vertiv, Mitsubishi, Toshiba, CyberPower, XPC, and Delta UPS for healthcare, data centres, and government. Enquiries answered in business hours.