Xtreme Power 208/230V UPS Systems

About Xtreme Power 208/230V UPS Systems

What is a 208/230 V UPS?

At 208 V or 230 V, a given watt of load draws roughly half the line current of the same load at 120 V. Half the current means quarter the I²R loss in cabling, smaller breakers, smaller conductors, and standard locking L6-30 receptacles in nearly every rack PDU. For dense IT racks, three-phase facilities, and edge data centres, 208/230 V single-phase or 208/120 V three-phase is the efficient and conventional voltage. Step down to 120 V only when continuous load is below ~2.4 kW.

XPC's 208/230 V catalog: P80g 3 / 5 kVA line-interactive sinewave, T91i 2/3 kVA online, P91g and P91g Li 1–3 kVA online (Unity PF), P91 5 / 6 / 10 kVA Unity PF, J90i 1U lithium, plus the three-phase M90S split-phase, M90C three-phase, M90U / M90LU / M90U-80 / M90U-140, Li90 lithium three-phase, E91 three-phase, and X90 1S / 2S 480 V three-phase up to 140 kVA. UPSPLUSBATTERY.CA stocks the range with matching XPC battery packs. For lower-power 120 V SKUs see XPC 120 V UPS. For full XPC catalog see Xtreme Power Conversion.

XPC 208/230 V models

How to choose

Single-phase vs three-phase 208 V

Most rack-level UPS deployments under 10 kVA run single-phase 208/230 V on L6-30P or hard-wired. Three-phase is required when the upstream distribution is three-phase and you want to balance load across phases — typical at 10 kVA+ in branch data centres and dense compute aisles.

P91 5K / 6K / 10K

2U Unity PF online, selectable input/output 208/220/230/240 V. P91-5K and P91-6K ship with NEMA L6-30P 6-foot input cord — drop into a dedicated 30 A 208 V circuit. P91-10K is hard-wired. Optional XBDM-P91 maintenance bypass distribution modules (with L6-30P input or terminal block) for service without dropping load.

Three-phase decision

M90S is the split-phase 120/208 or 120/240 V family — common where existing distribution gives split-phase. M90C is three-phase 208/120 V — common in commercial three-phase services. M90U / M90U-80 / M90U-140 are Unity PF Modular Online — for 15 to 140 kVA three-phase IT and facility. X90 1S / 2S is 480 V three-phase top-entry for data-centre-scale 50–140 kVA. Li90 is the lithium variant of three-phase 208/120 V at 10–30 kVA.

Replacement batteries and EBPs

P91 5–10 kVA: BPXR2U240A or BPXR3U240A external battery packs. P91g / T91i: P91-BP series. M90 / X90 / Li90: matching battery cabinets (M90-BC, X90-BC) with hot-swap modules. SLA cartridges in stock as compatible aftermarket — 1-year UPSPLUSBATTERY warranty. Lithium packs factory XPC only. Browse XPC battery packs.

Installation and warranty

P80g and P91 5/6 kVA on L6-30P plug — dedicated 30 A 208/230 V circuit by licensed electrician per CSA. P91-10K, M90, X90, Li90, E91 hard-wired only. M90 / X90 / Li90 commissioning by qualified XPC-authorized technician — site survey recommended before order. Warranty (USA and Canada) by series: P80g, T91i, P91g 3-year; P91 5–10 kVA 3-year standard, 5-year optional; J90i 6-year; P91g Li 6-year; M90U 2-year; Li90 5x8 startup + 2-year on-site, 5-year parts-limited battery; X90 with 5x8 startup + on-site service plans. Coordinated through our Canadian team. Shipped from our Canadian warehouse — see shipping policy for rates and timing. Replies within 1 business day.

FAQ

Why move from 120 V to 208 V?

Half the line current at the same watt rating — smaller breakers, smaller conductors, less voltage drop, lower thermal load in the rack. Standard rack PDUs are L6-30 fed from 208 V. For dense racks above 2.4 kW continuous, 208 V is the practical default.

208 V vs 230 V?

P91g and most M90 / X90 series accept both. 208 V is standard for North American three-phase derived single-phase. 230 V is European-style. Most Canadian commercial sites are 208 V. UPS internally regulates output regardless of which input voltage is present within range.

L6-30P vs hard-wire?

L6-30P locks into matching receptacle — UPS can be physically moved or rolled out for service. Hard-wired terminals are rated for higher current but require electrician for any move or replacement. P91 5–6 kVA shipped with L6-30P plug standard; 10 kVA hard-wired only.

What's the biggest XPC three-phase?

X90-2S 140 kVA at 480 V three-phase. Below that, M90U-140 covers 140 kVA at 208/120 V, M90U-80 covers 80 kVA, M90U covers 15–60 kVA single enclosure.

Can I use 208 V to feed my rack PDU?

Yes — that's the standard architecture. P91-6K with L6-30P out → metered/switched L6-30 PDU → C13/C19 servers and switches in the rack.

Battery life and replacement?

SLA: 4–5 years climate-controlled. Lithium (P91g Li, J90i, Li90): up to 15 years rated by XPC. When to replace UPS battery.

Canadian warranty?

Yes — XPC 208/230 V series warranty terms explicitly cover USA and Canada. RMA does not require cross-border shipping. Shipped from our Canadian warehouse.