Skip to product information
1 of 1

APC

APC RBC161 Replacement Battery Set

APC RBC161 Replacement Battery Set

Regular price $77.39 CAD
Regular price Sale price $77.39 CAD
Sale Sold out

In stock

Shipping calculated at checkout.

Fits APC BR1350MS (+5 more): 2 x 12 V 9 Ah, batteries only

Estimate shipping to your postal code

Local pickup: available in the Montreal area, Quebec, by appointment. Call 438-881-3363 first.

Quantity
  • Ships across Canada
  • 1-year UPSPLUSBATTERY warranty
  • Listed for your UPS but it doesn't fit? We pay the return shipping and send the right battery or refund you. Return policy

438-881-3363 · Confirm my UPS model

5+ units or a PO? Request a quote

Prefer it pre-wired? Assembled pack

Before you order

Product
Compatible replacement · each battery load-tested before packing RBC161
What you get
Batteries only: you reuse your cartridge, tray, module casing or cabinet, and its wiring.
In the box
2x 12V 9Ah Brand New Battery Cells (re-uses existing wiring)
Warranty
1-year UPSPLUSBATTERY warranty against defects.

Wrong choice? Return within 30 days, unused in its original packaging; you cover return shipping.

View full details
Compatibility

6 confirmed compatible UPS models

These UPS models are confirmed compatible. Check the complete model number on your UPS before ordering.

  • BR1350MS
    Confirmed
  • BN1500M2
    Confirmed
  • BN1500M2-CA
    Confirmed
  • BR1200SI
    Confirmed
  • BR1350MS-TW
    Confirmed
  • BR1500M2-LM
    Confirmed

Showing all 6 compatible UPS models.

Product details

About this battery pack

APC Back-UPS Pro BN1500M2 battery replacement: what the manual says (2-minute video)

Chapters and transcript
  • 0:00 Which battery fits the APC Back-UPS Pro BN1500M2?
  • 0:30 What do you need?
  • 0:50 What does the manual say before you start?
  • 1:07 The shape of the swap
  • 1:41 What do the alarms mean?
  • 2:01 Where do you buy it in Canada?

An APC Back-UPS Pro BN1500M2 is due for a battery. It takes one APCRBC161. That is 1 module, 24 volts, in a 1500 volt-amp, 900 watt tower. The BN1500M2-CA is the Canadian model and takes the same battery. This video shows what the battery is, what APC's manual says before you start, the shape of the swap, and the test after. UPS Plus Battery carries the RBC161 in 2 formats: a loose set that reuses your existing wiring, or an assembled pack ready to drop in. Both are linked below. You need a few minutes, rubber gloves and boots, and tools with insulated handles, as APC's manual lists. These are illustrations. Follow your UPS's manual. APC's manual is specific. Replace the battery with the same number and type. Take off rings, watches, and chains first: a terminal shorted by metal can cause severe burns. Never put a battery in the fire. Old batteries get recycled. The battery typically lasts 3 to 5 years, and frequent outages or heat shorten it. The manual leaves the exact steps to the instruction sheet in the RBC box, but every UPS swap follows the same shape. Stage 1: power down. Turn everything connected off, then turn the UPS off and unplug it. Stage 2: open the battery compartment the way the instruction sheet shows. Stage 3: swap the pack, red to red and black to black. Stage 4: close it up and secure the connections. Stage 5: recharge before you expect full runtime. Then run the self-test. Watch the alarms: four beeps every 30 seconds means the UPS is running on battery. Continuous beeping means a low battery condition with very little runtime left. And a delay in replacing a spent battery can corrode the batteries inside the cartridge, so swap it promptly when the UPS flags it. Both RBC161 formats are linked below. UPS Plus Battery ships UPS batteries across Canada from Montreal.

Specifications

Technical specifications

Pack voltage
24V DC (2 x 12 V)
Capacity
9.0Ah
Chemistry
VRLA (Sealed Lead-Acid)
Batteries included
2
OEM or Compatible
Compatible Replacement
Warranty
1 year
Frequently asked

Questions before you buy

Which battery does the APC BR1350MS take?

The APC BR1350MS takes 2 x 12 V 9 Ah batteries. This replacement is listed for it and for 3 other UPS models. Check the full model name on your UPS label before you order.

Which battery does the APC BN1500M2 take?

The APC BN1500M2 takes 2 x 12 V 9 Ah batteries. This replacement is listed for it and for 3 other UPS models. Check the full model name on your UPS label before you order.

Which battery does the APC BR1200SI take?

The APC BR1200SI takes 2 x 12 V 9 Ah batteries. This replacement is listed for it and for 3 other UPS models. Check the full model name on your UPS label before you order.

How do I confirm this battery fits my UPS?

Find the model number on the UPS label. Check that the exact model, including any regional suffix, is in the compatibility list above. If it is missing, email your UPS model number; we'll respond within one business day with the compatibility information we can verify.

What's the warranty, and who handles claims?

Replacement batteries carry a 1-year UPSPLUSBATTERY warranty against defects. Claims are handled by our team in Canada. Email info@upsplusbattery.com with your order number and a description of the fault. We will provide the next steps for your claim.

Is this an OEM battery or an aftermarket compatible?

Compatible aftermarket. This product is presented as a compatible replacement, not an OEM battery. Confirm the exact UPS model and review the product specifications before ordering. Replacement batteries carry the 1-year UPSPLUSBATTERY warranty.

Can you replace the battery for me on site?

Yes. On-site battery replacement is available. Request it online and this battery is already filled in for you. Request on-site replacement