About this UPS
- Brand: Tripp Lite by Eaton
- Product Type: Standby UPS
- Manufacturer Part Number: BC600SINE
- Input Voltage: 110 V AC
- Form Factor: Tower
- Plug/Connector Type: NEMA 5-15P
- Backup/Run Time (Half Load): 11.10 Minute
- Backup/Run Time (Full Load): 3.30 Minute
- Load Capacity: 600 VA/375 W
Marketing Information:
Tripp Lite's BC600SINE UPS system provides sine wave output in both line and battery power modes provides compatibility with all electronic loads, including PC and Mac systems fitted with Active Power Factor Corrected (PFC) power supplies. The BC600SINE switches to battery derived sine wave AC output during power failures and severe voltage fluctuations. Provides 18 minutes battery runtime with a typical desktop computer system (100 watts). USB port enables optional unattended system shutdown without data loss in case of extended power failure; cable included. USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X. PowerAlert shutdown software is also included. Built-in audible alarm and 4 front-panel LEDs indicate line power status, battery power status, overload status and battery low/replace status. 650VA/375W power handling ability. Supports user battery replacement via built-in access panel. 3-year warranty.
| PRODUCT SPECIFICATIONS | |
|---|---|
| Plug/Connector Type | NEMA 5-15P |
| Receptacle Type | NEMA 5-15R |
| Receptacle Detail | 3 x NEMA 5-15R |
| Transfer Time | 5 ms |
| Load Capacity (VA) | 600 VA |
| Load Capacity (Watt) | 375 W |
| Input Voltage | 110 V AC |
| Input Current | 10 A |
| Output Voltage | 120 V AC |
| USB | Yes |
| Backup/Run Time (Full Load) | 3.30 Minute |
| Backup/Run Time (Half Load) | 11.10 Minute |
| Typical Battery Recharge Time | 9 Hour |
| Hot Swappable | Yes |
| Height | 10.75" (273.05 mm) |
| Width | 5.25" (133.35 mm) |
| Depth | 7.50" (190.50 mm) |
| Form Factor | Tower |
| Weight (Approximate) | 14.60 lb (6622.45 g) |
| Package Contents |
|
| Certifications & Standards |
|
| Software Included | PowerAlert Software |
| Country of Origin | China |
| Environmentally Friendly | Yes |
| Environmental Compliance | Restriction of Hazardous Substances (RoHS) |
| Limited Warranty | 3 Year |
Technical specifications
How long it'll keep your equipment up.
Manufacturer-specified runtime at typical loads. Real-world figures depend on battery age, ambient temperature, and load profile.
Estimate based on manufacturer-specified runtime curve. Real-world runtime varies with battery age, ambient temperature, and load profile.
Replacement batteries that fit this exact UPS
A line-interactive UPS typically needs new batteries every 3–5 years. We stock the matching replacement cartridges — Canadian warranty.
Before you order
How do I know this UPS will run my equipment?
Add up the wattage draw of every device you'll plug in (servers, switches, monitors). The UPS's wattage rating — not VA — is the number that matters. Aim for the UPS to run at 60–70% of capacity at full load: this gives headroom for inrush current and a meaningful runtime margin. Email us your equipment list and we'll size the right UPS within one business hour.
What's covered by the warranty, and how long does it last?
New units carry the full manufacturer warranty registered to you on receipt. The manufacturer handles claims directly via their North American support channel. Refurbished units are covered by our own 1-year UPSPLUSBATTERY warranty handled in-house in Canada.
Can I extend runtime beyond what's shown above?
Many Smart-UPS-class models accept an external battery pack (XBP) connected to the rear battery port. If this UPS shows "Extended Runtime Capable: Yes" in the spec grid above, an XBP is supported. Compatible XBPs and the runtime gain they deliver vary by model — contact us if you don't see the right XBP in our catalogue.