Tripp Lite OMNIVSX1500 1500 VA / 900 W Tower Line-Interactive UPS 230 V
- VA
- 1500
- Watts
- 900
- Form
- Tower
- Topology
- Line-Interactive
- Outlets
- 8× IEC 60320 C13
| PRODUCT SPECIFICATIONS | |
|---|---|
| AVR | Yes |
| Plug/Connector Type | CEE 7/7 |
| Receptacle Type | Schuko CEE 7/7 |
| Receptacle Detail | 8 x Schuko CEE 7/7 |
| Number of Battery & Surge Outlets | 4 |
| Transfer Time | 6 ms |
| EMI/RFI Noise Filter | Yes |
| Phase | Single Phase |
| Energy Saving | Green Energy-Saving |
| Application/Usage |
|
| Load Capacity (VA) | 1 kVA |
| Load Capacity (Watt) | 600 W |
| Input Voltage | 230 V AC |
| Output Voltage |
|
| Input Frequency | 50 Hz |
| Output Frequency | 60 Hz |
| Waveform Type | Pulse-width Modulated Sine Wave |
| Surge Energy Rating | 312 J |
| Alarm |
|
| Status Indicators |
Front Panel LCD Display:
|
| USB (HID Compliant) Port | Yes |
| DC System Voltage | 12 V DC |
| Battery Size | 12V |
| Backup/Run Time (Full Load) | 30 Second |
| Backup/Run Time (Half Load) | 5 Minute |
| Typical Battery Recharge Time | 8 Hour |
| Replaceable Battery | Yes |
| Maximum Operating Temperature | 104 °F (40 °C) |
| Storage Temperature | 5 °F (-15 °C) - 122 °F (50 °C) |
| Storage Relative Humidity | 90% |
| Sound Emission | 40 dB |
| Thermal Dissipation | 60 BTU/h |
| Height | 6.30" (160.02 mm) |
| Width | 4.80" (121.92 mm) |
| Depth | 13.60" (345.44 mm) |
| Form Factor | Tower |
| Weight (Approximate) | 14.30 lb (6486.37 g) |
| Package Contents |
|
| Country of Origin | China |
| Environmentally Friendly | Yes |
| Environmental Compliance | Restriction of Hazardous Substances (RoHS) |
| Limited Warranty | 2 Year |
Manufacturer-specified runtime at typical loads. Real-world figures depend on battery age, ambient temperature, and load profile.
A line-interactive UPS typically needs new batteries every 3–5 years. Matching replacement cartridges are listed by UPS model; confirm the exact model before ordering.
Add up the wattage draw of every device you'll plug in (servers, switches, monitors). The UPS's wattage rating (not VA) is the number that matters. Aim for the UPS to run at 60–70% of capacity at full load: this gives headroom for inrush current and a meaningful runtime margin. Email us your equipment list; we'll respond within one business day with sizing guidance.
New units carry the warranty coverage stated by the manufacturer; see the product listing or manufacturer documentation for the applicable terms. Refurbished units are covered by the 1-year UPSPLUSBATTERY warranty handled in Canada.
Many Smart-UPS-class models accept an external battery pack (XBP) connected to the rear battery port. If this UPS shows "Extended Runtime Capable: Yes" in the spec grid above, an XBP is supported. Compatible XBPs and the runtime gain they deliver vary by model; contact us if you don't see the right XBP in our catalogue.