16 confirmed compatible UPS models
These UPS models are confirmed compatible. Check the complete model number on your UPS before ordering.
-
SMC1500CConfirmed
-
SMT1000CConfirmed
-
SMT1000CUSConfirmed
-
SMT1000TWConfirmed
-
SUA1000USConfirmed
-
SMC1500IConfirmed
-
SMT1000IConfirmed
-
SMT1000ICHConfirmed
-
SMT1000USConfirmed
-
SUA1000IConfirmed
-
SUA1000ICHConfirmed
-
SUA1000ICH-45Confirmed
-
SUA1000J3WConfirmed
-
SMC1500Confirmed
-
SUA1000Confirmed
-
SMT1000Confirmed
Showing 12 of 16 compatible UPS models.
About this battery pack
Which Smart-UPS models take the RBC6 battery? (3-minute video)
Chapters and transcript
- 0:00 Which APC Smart-UPS 1000 and 1500 Models Take the RBC6 Cartridge?
- 0:49 Which Smart-UPS 1000 Models and Adjacent Towers Do Not Take RBC6?
- 1:59 Should You Choose the Pre-Wired Compatible Pack or the Two-Battery Set?
- 2:19 What Do the Smart-UPS Battery Alarms Mean and Where Is the Internal Battery Connector?
APC Smart-UPS 1000 VA towers SMT1000 and SMT1000C, plus SMC1500C, take one RBC6 battery cartridge. Cartridge RBC6 also fits towers SMT1000CUS, SMT1000US, and legacy SU1000. APC lists RBC6 at 94 by 152 by 196 millimeters and 7.68 kilograms, or 16.93 pounds. The SMT1000 tower series is rated at 1000 VA and 700 watts, with eight NEMA 5-15R outlets. Tower SMC1500C is rated at 1440 VA and 900 watts and also takes one RBC6.
Not every Smart-UPS 1000 takes RBC6: tower SMC1000C takes APCRBC142, and rackmount 1000 VA models take different packs. Per manual 990-6411A page 17, check the rear model label or the LCD About menu. The 600-watt tower SMC1000C takes APCRBC142, while extended-run tower SUA1000XL takes RBC7. Convertible 2U model SMX1000C takes 48-volt APCRBC116, and 2U rack SMC1000-2UC takes APCRBC124. Rack model SMT1000RM2UC takes APCRBC157 and SU1000RM2U takes RBC23, while 1U SMT1000RM1U takes RBC43. In adjacent towers, 750 VA SMT750C takes RBC48, and 1500 VA SMT1500C and SUA1500 take RBC7.
Choose our pre-wired 24-volt, 12-amp-hour compatible pack for plug-and-play installation, or our two-battery set that re-uses existing wiring. Our pre-wired compatible pack pairs two 12-volt, 12-amp-hour VRLA batteries with the matching connector installed. Our two-battery set supplies two 12-volt, 12-amp-hour batteries where you transfer your existing wiring.
Manual 990-6411A places the battery and internal battery connector behind the front bezel, and requires resetting the Battery Install Date. A solid LED with 1 minute of beeping every 5 hours means a weak charge: recharge 4 hours, test, and replace if it persists. A flashing Replace Battery LED with beeps every 2 seconds, or chirps every 4 seconds per FAQ FA156554, means a disconnected battery. On page 4 of manual 990-6411A, remove watches and rings, use insulated tools, and use a direct wall outlet. Per manual 990-6411A page 9, the battery charges to 90 percent capacity in the first 3 hours of normal operation. In the LCD Configuration menu, reset the Battery Install Date so the 14-day self-test tracks your new module. Match your Smart-UPS rear label to RBC6 before ordering, choose our pre-wired compatible pack or two-battery set, and reset the Battery Install Date. Find the battery for your UPS model at UPSPLUSBATTERY. Our replacement batteries carry a one-year full replacement warranty.
Technical specifications
Questions before you buy
Which battery does the APC SMC1500 take?
The APC SMC1500 takes 2 x 12 V 12 Ah batteries. This replacement is listed for it and for 2 other UPS models. Check the full model name on your UPS label before you order.
Which battery does the APC SUA1000 take?
The APC SUA1000 takes 2 x 12 V 12 Ah batteries. This replacement is listed for it and for 2 other UPS models. Check the full model name on your UPS label before you order.
Which battery does the APC SMT1000 take?
The APC SMT1000 takes 2 x 12 V 12 Ah batteries. This replacement is listed for it and for 2 other UPS models. Check the full model name on your UPS label before you order.
How do I confirm this battery fits my UPS?
Find the model number on the UPS label. Check that the exact model, including any regional suffix, is in the compatibility list above. If it is missing, email your UPS model number; we'll respond within one business day with the compatibility information we can verify.
What's the warranty, and who handles claims?
Replacement batteries carry a 1-year UPSPLUSBATTERY warranty against defects. Claims are handled by our team in Canada. Email info@upsplusbattery.com with your order number and a description of the fault. We will provide the next steps for your claim.
Is this an OEM battery or an aftermarket compatible?
Compatible aftermarket. This product is presented as a compatible replacement, not an OEM battery. Confirm the exact UPS model and review the product specifications before ordering. Replacement batteries carry the 1-year UPSPLUSBATTERY warranty.
Can you replace the battery for me on site?
Yes. On-site battery replacement is available. Request it online and this battery is already filled in for you. Request on-site replacement
