What replacement battery do I need for an APC Back-UPS BVK750M2, and how do I avoid buying the wrong one online?

If you're here, you need to replace the battery in your APC Back-UPS BVK750M2 and can't afford to waste time or money on the wrong part. As specialists who've helped thousands of IT teams, facility managers, and admins get their backup systems running without hassle, we'll walk you through picking (and verifying) the right battery, show you what to expect during replacement, flag the most common ordering mistakes, and point you to the fastest support if you need help.

Which battery fits the APC Back-UPS BVK750M2?

This is a common confusion point. Unlike some older APC models that use complete cartridge kits, the BVK750M2 simply takes a single 12V, 9Ah sealed lead-acid battery (SLA)—no complicated wiring harness or hard-to-source cartridge. If you're after the specific, tested, in-stock part for Canadian buyers, buy the 12V 9Ah replacement battery here. We usually ship within 1–2 business days, right from Montreal, and you'll avoid customs headaches or cross-border delays.

Buy the correct battery, right now:

• Buy 12V 9Ah Replacement Battery for APC BVK750M2

Quick Pre-Purchase Verification Checklist: Avoid the Wrong Battery

Before you hit purchase, double-check these five points on your actual UPS and (if accessible) the dead battery inside.

Step	Where to Check	What You Want
UPS Model	Sticker on rear or underside	BVK750M2
Battery Label / Cart Number	Batter compartment, battery itself	12V, 9Ah – No kit, just single battery (not wrapped cartridge)
Number of Batteries	Open compartment	1 (one) battery, not two or more
Voltage & Ah Rating	Stamped on battery case	12V, 9Ah (7Ah is smaller; 12Ah is okay if same dimensions)
Connector Type	Battery terminals	F2 Faston (1/4" or 6.35mm wide spade)

If everything here matches up, you're good to add to cart. For more detail on how to interpret battery specs and avoid mistakes, our team at UPSPlusBattery is always available by phone or email.

What’s In the Box When You Order

You'll receive:

• One brand new, 12V 9Ah sealed lead-acid battery (3.7 kg)
• Tested and charged, ready for installation
• 1-year warranty for product defects
• Simple instructions: use your existing UPS harness and screws

You won’t get new wiring or hardware—most APC models, including the BVK750M2, are designed for you to reuse your current cables and screws.

Shipping & What to Expect After Signing Out the Order

• We ship from Montreal (no border issues) across Canada
• Orders leave the warehouse in 1–2 business days
• Local pick-up available (see our Shipping Policy for details)
• You'll get tracking info by email. No PO boxes.
• Direct support: 438‑881‑3363 if there’s any shipping question

Installation Reality Check: How Long, What Tools, Is it Hot-Swappable?

Is it hot-swappable?

No—this battery isn’t designed for true hot-swap. Plan for a power-down (full shutdown) of your protected equipment. If you’re in a critical environment, always schedule downtime.

Time to Replace:

Plan 10 to 15 minutes start-to-finish (excluding recharge/testing time).

Tools Needed:

• #2 Phillips screwdriver (to open the battery compartment)
• Small flashlight (sometimes useful to see terminals clearly)
• Protective gloves (if battery shows swelling, leakage, or corrosion)

Steps (Summary):

1. Unplug UPS, disconnect devices, let sit 10+ mins to discharge
2. Remove battery door (2–4 screws depending on batch)
3. Pull battery out, remove spade connectors (note color/polarity)
4. Plug new battery in, check tightness
5. Close up door, reconnect, and recharge at least 6 hours before testing backup

What NOT to do (Critical Safety):

• Don’t mix fresh and old batteries. You only need one—replace all at the same time in systems with multiples.
• Don’t force connector types (F1 is too small, you need F2).
• Never operate UPS with battery compartment open or unsecured.
• If the battery is physically damaged, burnt, or leaking, don’t attempt swap—contact a pro or call us first.
• If you’re in a data center or managed infrastructure, always follow your facility’s change control.

If alarms continue, the unit smells burnt, the battery is swollen, or you’re unsure about any installation step, contact a certified pro—serious electrical faults can’t be fixed by battery replacement alone. We recommend booking maintenance or service through GDFTech.com if you encounter more than just a routine battery swap.

Common Wrong Orders Our Team Sees (and How to Avoid Them)

• Purchasing a complete cartridge (like RBC178)—the BVK750M2 doesn’t use a closed cartridge design
• Buying two batteries when you only need one
• Mixing 7Ah with 9Ah (lower runtime, less backup, may cause alarms)
• Ordering the wrong terminal (F1 instead of F2—you’ll end up with loose or impossible connections)
• Attempting a lithium-ion swap—these aren’t compatible and will damage the UPS

If you want more tips on how to avoid mismatches for various UPS models, our practical guide on UPS Batteries in Canada: How to Buy the Right Voltage and Ah can help.

FAQ: Everything You Need to Know Before You Buy

The Next Step: Order With Confidence

Pick the compatible 12V 9Ah replacement and get your APC BVK750M2 back online fast. If there’s any uncertainty about your UPS model or site compatibility, call us at 438-881-3363 or use our contact page—no question is too small when it comes to business continuity.

If your situation is urgent or critical, or you see hardware/battery faults beyond a normal swap, request help from GDFTech.com to bring in a certified technician or schedule a site check. For strategic UPS upgrades or lifecycle planning, UPSPlusBattery can consult, supply, and even install across Canada.

Ready to solve it? Buy the APC BVK750M2 replacement battery now and get your site protected again without wasted time, money, or mistakes.